Conserte seus objetos Comunidade Loja

Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement

Introdução

If your digitizer cable has failed in your Panasonic Lumix DMC-FX9 camera, follow this guide to replace. By following this guide you should be able to continue using your camera.

A digitizer cable is important to the camera as it sends the display signals to the camera screen from the motherboard. It is vital for both camera operation and a live view of the lens.

Be sure to remove the batteries from your camera prior to beginning this guide.

O que você precisa

  1. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement, Loose Digitizer Cable: passo 1, imagem 1 %32

    • Power off your device by locating the on/off switch on top of camera.

    Editar

  2. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 2, imagem 1 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 2, imagem 2 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 2, imagem 3 %32

    • Remove the screw located on the right side of the camera.

    • Remove the screw located on the bottom right of the camera, and remove the cover from the camera.

    Editar

  3. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 3, imagem 1 %32

    • Remove the screw located on the base of the camera.

    Editar

  5. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 4, imagem 1 %32

    • Pry the top part of the camera slowly. Be careful not to tear the digitilizer cable.

    Editar

  6. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 5, imagem 1 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 5, imagem 2 %32

    • Open the bigger clamp using a spudger or other tools. Repeat for the smaller clamp.

    Editar

  7. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 6, imagem 1 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 6, imagem 2 %32

    • Carefully take the thin ribbon and insert cable end into the latch. Do this for both sides.

    Editar

  8. Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 7, imagem 1 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 7, imagem 2 %32 Panasonic Lumix DMC-FX9 Loose Digitizer Cable Replacement: passo 7, imagem 3 %32

    • Once the ribbon is placed into the latch, carefully close the clamps by lowering the clamp into a down position. Repeat this step for both sides.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 4

Últimos 30 dias: 10

Duração total: 305