Ir para o conteúdo principal

Panasonic Lumix DMC-FX07 Back Cover Replacement

O que você precisa

  1. Panasonic Lumix DMC-FX07 Back Cover Replacement, Battery: passo 1, imagem 1 %32
    • Move the switch on the battery door to the Open position.

    • The door will automatically swing open after you let it go.

  2. Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 2, imagem 1 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 2, imagem 2 %32
    • Push the small gray tab on the top right corner to the left. The battery will pop out slightly.

    • Keep your finger clear of the battery when it pops out.

  3. Panasonic Lumix DMC-FX07 Back Cover Replacement, Memory Card: passo 3, imagem 1 %32
    • Push the memory card in and let go.

    • The memory card will pop out slightly.

    • Pull out the memory card.

  4. Panasonic Lumix DMC-FX07 Back Cover Replacement, Back Cover: passo 4, imagem 1 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement, Back Cover: passo 4, imagem 2 %32
    • Unscrew the small screws on the sides of the camera.

    • The screws on the left side(#00P, 4.7mm) are longer than the screw on the right side(#00P, 3.3mm).

  5. Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 5, imagem 1 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 5, imagem 2 %32
    • Unscrew the three small screws on the bottom(#00P, 3.3mm).

    • The bottom will fall off.

  6. Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 6, imagem 1 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 6, imagem 2 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 6, imagem 3 %32
    • Lift up the bottom back cover by prying the bottom edge with the spudger.

    • Gently lift up the back cover with your hand from the bottom to the top.

  7. Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 7, imagem 1 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 7, imagem 2 %32 Panasonic Lumix DMC-FX07 Back Cover Replacement: passo 7, imagem 3 %32
    • Lift the tabs on the ZIF connectors.

    • The ribbon cables should easily come out of the ZIF connectors.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Karissa

Membro desde: 04/13/12

50 Reputação

Autoria de 8 guias

Equipe

Cal Poly, Team 6-23, Amido Spring 2012 Membro de Cal Poly, Team 6-23, Amido Spring 2012

CPSU-AMIDO-S12S6G23

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 7

Duração total: 1,395