Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Panasonic Lumix DMC-F7 Replacing Back Case Replacement

O que você precisa

  1. Panasonic Lumix DMC-F7 Replacing Back Case Replacement, Battery: passo 1, imagem 1 %32
    • Slide the lock switch to the right so that it is in the unlocked position.

    • Use your finger to slide the battery hatch in the direction of the downward arrow so that the hatch is open.

    • Both battery and memory card should now be visible.

  2. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 2, imagem 1 %32
    • Open the battery hatch and then the black cover to expose the battery compartment.

    • The camera used to create these repair guides did not have a battery and memory card.

    • Remove the battery.

    • When installing the new battery, ensure it is in the same orientation as before.

  3. Panasonic Lumix DMC-F7 Replacing Back Case Replacement, Replacing Back Case: passo 3, imagem 1 %32
    • Remove the two 2.8 mm Phillips screws as shown in picture.

  4. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 4, imagem 1 %32
    • Use a Philips screwdriver to remove the three 2.8 mm Phillips screws on the bottom of the camera as shown in picture.

  5. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 5, imagem 1 %32
    • Remove the two 2.8 mm Phillips screws on the side of the camera as shown in picture.

  6. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 6, imagem 1 %32 Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 6, imagem 2 %32
    • Use a spudger to pry open the case from all sides.

  7. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 7, imagem 1 %32 Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 7, imagem 2 %32
    • Beware of the ribbon cable that is still attached when opening.

    • Use your fingers to carefully pry off the back casing from the camera assembly.

  8. Panasonic Lumix DMC-F7 Replacing Back Case Replacement: passo 8, imagem 1 %32
    • Lay the camera on its front side. Use the spudger to open the film strip locking mechanism and remove strip.

    • Hold down on the camera's metal casing with one hand. Use your other hand to completely lift the back case off the rest of the camera, making sure the film strip separates.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Alex Penman

Membro desde: 01/28/11

463 Reputação

Autoria de 4 guias

Equipe

Cal Poly, Team 7-35, Regan Winter 2011 Membro de Cal Poly, Team 7-35, Regan Winter 2011

CPSU-REGAN-W11S7G35

Membros da 4

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 891