Conserte seus objetos Comunidade Loja

Panasonic KX-TG6021M Front Speaker Replacement

Introdução

This guide will show you how to replace the front speaker of the Panasonic KX-TG6021M.

O que você precisa

  1. Panasonic KX-TG6021M Front Speaker Replacement, Battery: passo 1, imagem 1 %32 Panasonic KX-TG6021M Front Speaker Replacement, Battery: passo 1, imagem 2 %32

    • Slide the back cover down towards the bottom of the phone to remove.

    Editar

  2. Panasonic KX-TG6021M Front Speaker Replacement: passo 2, imagem 1 %32 Panasonic KX-TG6021M Front Speaker Replacement: passo 2, imagem 2 %32 Panasonic KX-TG6021M Front Speaker Replacement: passo 2, imagem 3 %32

    • Pull the top of the battery towards you to remove it from the phone.

    Editar

  3. Panasonic KX-TG6021M Front Speaker Replacement, Front Panel: passo 3, imagem 1 %32 Panasonic KX-TG6021M Front Speaker Replacement, Front Panel: passo 3, imagem 2 %32

    • Unscrew the two screws located at the bottom of the phone.

    • Use a PH00 Phillips head to remove the 9 mm screws.

    Editar

  5. Panasonic KX-TG6021M Front Speaker Replacement: passo 4, imagem 1 %32 Panasonic KX-TG6021M Front Speaker Replacement: passo 4, imagem 2 %32 Panasonic KX-TG6021M Front Speaker Replacement: passo 4, imagem 3 %32

    • Separate the back cover from the front cover by using a wedge.

    • Remove the back cover from the front cover by pulling them apart.

    Editar

  6. Panasonic KX-TG6021M Front Speaker Replacement: passo 5, imagem 1 %32

    • Remove three screws on the motherboard.

    • Pull the phone face off of the motherboard.

    Editar

  7. Panasonic KX-TG6021M Front Speaker Replacement, Front Speaker: passo 6, imagem 1 %32

    • Remove the front speaker housing by detaching it from the circuit board.

    Editar

  8. Panasonic KX-TG6021M Front Speaker Replacement: passo 7, imagem 1 %32

    • Pop out the front speaker from the housing.

    Editar

  9. Panasonic KX-TG6021M Front Speaker Replacement: passo 8, imagem 1 %32

    • Desolder the two connections and remove the wires from the circuit board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

paul scruggs

Membro desde: 10/24/16

177 Reputação

Autoria de 1 guia

Emblemas: 8

+5 outros emblemas

Equipe

IUPUI, Team 3-1, Baechle Fall 2016 Membro de IUPUI, Team 3-1, Baechle Fall 2016

IUPUI-BAECHLE-F16S3G1

Membros da 4

Autoria de 12 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 2

Últimos 30 dias: 8

Duração total: 214