Introdução

Is your shaver not working even when its batteries have been replaced? if so, here is the guide to fix the problem by replacing the motor. All you need is a standard Phillips Screwdriver to remove two screws during the replacement.

  1. Twist the release cap  to expose the batteries.
    • Twist the release cap to expose the batteries.

    Adicionar comentário

  2. Remove the batteries
    • Remove the batteries

    Adicionar comentário

    • Remove the razor guard by pushing its release buttons and pulling.

    Adicionar comentário

    • Carefully pull out the inner blades.

    Adicionar comentário

    • Remove the two 1.9mm Phillips #0 screws from the inner blades.

    Adicionar comentário

    • Remove the metal plate.

    Adicionar comentário

    • Pull the outer casing with one hand while holding the inner battery casing with the other hand.

    Adicionar comentário

    • Detach the white plastic blade base from the tip of the motor by pulling it.

    Adicionar comentário

    • Detach motor from gray plastic holder by pulling it.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

muhammad samsulsham

Member since: 21-05-2018

253 reputação

2 Guides authored

Equipe

IUPUI, Team S1-G5, Harley Spring 2018 Membro de IUPUI, Team S1-G5, Harley Spring 2018

IUPUI-HARLEY-S18S1G5

6 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 76