Introdução

Before you begin disassembly, be sure to have the necessary tool. You will need a Torx size T6 screwdriver. You will be removing the stylus in order to take off the back panel.

Peças

Não são necessárias peças.

Remove the stylus from the side of the PDA by sliding it upwards.
  • Remove the stylus from the side of the PDA by sliding it upwards.

Adicionar comentário

Remove the 4 screws from the corners of the back panel of the device using a size T6 Torx screwdriver. Place screws in a plastic bag or another safe place.
  • Remove the 4 screws from the corners of the back panel of the device using a size T6 Torx screwdriver.

  • Place screws in a plastic bag or another safe place.

Adicionar comentário

Insert the edge of the plastic opening tool between the back panel and the black stylus holder. Carefully and forcefully pry the panels apart. Carefully and forcefully pry the panels apart.
  • Insert the edge of the plastic opening tool between the back panel and the black stylus holder.

  • Carefully and forcefully pry the panels apart.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Alex Haggblade

Member since: 12-01-2011

104 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 14-9, Forte Winter 2011 Membro de Cal Poly, Team 14-9, Forte Winter 2011

CPSU-FORTE-W11S14G9

6 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 958