Introdução

Replacement parts can be hard to find. The case on the m105 can be easily removed, and a replacement shell casing can be used to replace your damaged one. Check out this site here to buy a replacement.

Peças

Não são necessárias peças.

  1. Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.
    • Remove the protective flip lid of the device. Open lid and pull. There are two clips that will pop out.

    Adicionar comentário

  2. Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.
    • Next, remove the plate on the top of the device. There is a tab at the top that un- clips and allows you to remove the face plate.

    Adicionar comentário

    • Remove the batteries by opening the battery compartment on the back of the device. Remove one battery at a time.

    Adicionar comentário

    • Using a T-5 Torx screwdriver, remove all four screws at the back of device by turning counterclockwise. Screwdriver located here.

    Adicionar comentário

    • Once the four screws are removed, you are able to remove the back and front cover from the interior parts of the device.

    Adicionar comentário

  3. Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Travis

Member since: 04-10-2011

4 reputação

Autoria de 1 guia

Equipe

UW Stout, Team 1-3, Zhou Fall 2011 Membro de UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 14

Todo: 578