Ir para o conteúdo principal

Palm m105 Batteries Replacement

  1. Palm m105 Batteries Replacement, Batteries: passo 1, imagem 1 %32
    • Press the latch on the battery door on the back of the device and pull outwards.

    • Back the device up if possible, you may lose all your data if there is no power for a little too long for it to retain it, make sure this is done quickly.

  2. Palm m105 Batteries Replacement: passo 2, imagem 1 %32
    • Install two AAA alkaline batteries into the battery compartment, placing the positive and negative ends of the battery in the correct positions. (Shown as a diagram inside the battery compartment)

    • Make sure to remove one battery at a time and replace with fresh battery. This will retain information on the device.

  3. Palm m105 Batteries Replacement: passo 3, imagem 1 %32
    • Place the battery door back into place on the back of the device; it will make a 'click' sound when properly reattached.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Erik Thompson

Membro desde: 10/04/11

31 Reputação

Autoria de 5 guias

Equipe

UW Stout, Team 1-3, Zhou Fall 2011 Membro de UW Stout, Team 1-3, Zhou Fall 2011

UWSTOUT-ZHOU-F11S1G3

Membros da 4

Autoria de 7 guias

Um comentário

"Moderate difficulty"?? There's only three steps and two of them involve removing and reinstalling the battery door.

Gene Merritt - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 4

Últimos 30 dias: 7

Duração total: 1,222