Introdução

Follow this guide to access the antenna of the cell phone.

Peças

Não são necessárias peças.

Press the button located just above the Sprint™ logo then slide the cover down.
  • Press the button located just above the Sprint™ logo then slide the cover down.

Adicionar comentário

Use the small notch on the left hand side of the phone to remove the battery.
  • Use the small notch on the left hand side of the phone to remove the battery.

Adicionar comentário

  • Remove the stylus from the phone/ Make this picture a close up by zooming in on the stylus.

Adicionar comentário

  • After removing the battery and stylus, unscrew the 5 Torx screws (using a T-5 Torx screw driver)/Use a T-5 Torx screwdriver to unscrew the 5 Torx screws./Make a close up of the screws.

Adicionar comentário

  • Using the spudger, remove the small rubberized patch under the antenna./Make a close up of this picture for this step as well by zooming in.

Adicionar comentário

  • Unscrew the last two screws using the same screw driver./ No edits necessary

Adicionar comentário

  • Using the plastic opening tool, carefully pry open the back case to loosen the antenna./Is the plastic opening tool something that comes with the phone? What exactly is this tool?

Adicionar comentário

  • Once the antenna is loose, pull the antenna out of the phone./edits are unnecessary

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

John Rainier Solanzo

Member since: 17-04-2012

4 reputação

2 Guides authored

Equipe

Cal Poly, Team 12-37, Regan Spring 2012 Membro de Cal Poly, Team 12-37, Regan Spring 2012

CPSU-REGAN-S12S12G37

4 Membros

14 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 621