Este guia tem alterações mais recentes. Mudar para a última versão não verificada.
Introdução
This guide shows you how to take off the back panel to the Palm Treo 680 in order to reach the other components within side the phone.
O que você precisa
-
-
Remove the battery cover by pressing on the small rectangular button located on the back of the phone.
-
-
-
Remove the stylus in order to access the screw.
-
Unscrew the 0.266 inch top-left screw using a T6 Torx screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.