Ir para o conteúdo principal

Palm Treo 650 Case Replacement

O que você precisa

  1. Palm Treo 650 Case Replacement, Battery and Stylus: passo 1, imagem 1 %32
    • Position the phone so the screen faces down.

    • Remove the stylus found on the back of the phone.

  2. Palm Treo 650 Case Replacement: passo 2, imagem 1 %32
    • Hold the button in the middle of the phone's back to remove the battery cover.

    • Slide the cover down to remove it, and set the cover aside.

  3. Palm Treo 650 Case Replacement: passo 3, imagem 1 %32 Palm Treo 650 Case Replacement: passo 3, imagem 2 %32
    • Lift the edge of the battery, separating contact points, and pull out as pictured.

  4. Palm Treo 650 Case Replacement, Case: passo 4, imagem 1 %32
    • Remove the round, rubber cover to expose a screw that will be removed in the next step.

  5. Palm Treo 650 Case Replacement: passo 5, imagem 1 %32 Palm Treo 650 Case Replacement: passo 5, imagem 2 %32
    • Remove the six 6.9 mm screws as pictured with a T5 Torx screwdriver.

    • Remove the single 9.8 mm screw next to the antenna on the back plate, using a Phillips #00 screwdriver.

  6. Palm Treo 650 Case Replacement: passo 6, imagem 1 %32
    • Pull the antenna outward to remove the antenna from the body of the phone.

  7. Palm Treo 650 Case Replacement: passo 7, imagem 1 %32 Palm Treo 650 Case Replacement: passo 7, imagem 2 %32
    • Pry the back cover off using an iFixit opening tool.

    • Several small clips on the inside attach to the back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

mmedrano

Membro desde: 11/15/09

95 Reputação

Autoria de 2 guias

Equipe

Cal Poly, Team 19-3, Maness Fall 2009 Membro de Cal Poly, Team 19-3, Maness Fall 2009

CPSU-MANESS-F09S19G3

Membros da 4

Autoria de 18 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 3,072