Introdução

Replace the speaker

On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
  • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

Adicionar comentário

Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
  • Use the T6 Torx Screwdriver to remove all 4 screws.

  • You have to first remove the Stylus to access the 4th screw.

Adicionar comentário

Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
  • Using a plastic opening tool, carefully separate the front and back cases.

  • Note: The antenna will detach from the phone.

Adicionar comentário

Using the spudger, pull the speaker straight up.
  • Using the spudger, pull the speaker straight up.

Adicionar comentário

Gently pull the rubber coating off of the speaker.
  • Gently pull the rubber coating off of the speaker.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Member since: 26-01-2010

24 reputação

14 Guides authored

Equipe

Cal Poly, Team 13-23, Maness Winter 2010 Membro de Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Membros

16 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,448