Pular para o conteúdo principal

Introdução

Replace the keyboard!!

Peças

Nenhum componente especificado.

  1. On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.
    • On the back of the device, locate the 3 rubber plugs, and use a plastic spudger to remove them.

  2. Use the T6 Torx Screwdriver to remove all 4 screws. You have to first remove the Stylus to  access the 4th screw.
    • Use the T6 Torx Screwdriver to remove all 4 screws.

    • You have to first remove the Stylus to access the 4th screw.

  3. Using a plastic opening tool, carefully separate the front and back cases. Note: The antenna will detach from the phone.
    • Using a plastic opening tool, carefully separate the front and back cases.

    • Note: The antenna will detach from the phone.

  4. Using a T6 Torx Screwdriver, remove the two screws. The motherboard will now be loose from the front case.
    • Using a T6 Torx Screwdriver, remove the two screws.

    • The motherboard will now be loose from the front case.

  5. Using the spudger, flip open the clasp that holds the data ribbon in place.
    • Using the spudger, flip open the clasp that holds the data ribbon in place.

  6. Pull out the ribbon.
    • Pull out the ribbon.

    • The keyboard will disconnect from the phone.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Clement Poisson

Membro desde: 26-01-2010

24 reputação

7 Guias de autoria

Equipe

Cal Poly, Team 13-23, Maness Winter 2010 Membro de Cal Poly, Team 13-23, Maness Winter 2010

CPSU-MANESS-W10S13G23

4 Membros

16 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,422