Conserte seus objetos Comunidade Loja

Palm TX Battery Pack Replacement

Introdução

Outline what you are going to teach someone how to do.

O que você precisa

  1. Palm TX Battery Pack Replacement, Back Panel: passo 1, imagem 1 %32 Palm TX Battery Pack Replacement, Back Panel: passo 1, imagem 2 %32

    • Orient the device so that the display faces forward.

    • Remove the stylus from the right side.

    Editar

  2. Palm TX Battery Pack Replacement: passo 2, imagem 1 %32

    • Turn over the device so that the back panel faces forward.

    • Use a T5 Torx screwdriver to remove the four 6.35mm corner screws.

    Editar

  4. Palm TX Battery Pack Replacement: passo 3, imagem 1 %32 Palm TX Battery Pack Replacement: passo 3, imagem 2 %32

    • Rotate the device so that the display faces forward.

    • Insert a plastic opening tool with the angled tip pointing downward into the crevice on the left side of the device.

    • Pry along the crevice to loosen the back panel.

    • Repeat this process for the right side.

    Editar

  5. Palm TX Battery Pack Replacement: passo 4, imagem 1 %32 Palm TX Battery Pack Replacement: passo 4, imagem 2 %32

    • Carefully pry the back panel to open the device.

    • Be careful not to break the wire that connects the battery pack to the motherboard.

    • When reassembling, snap the back panel back into place and then insert the top cover.

    Editar

  6. Palm TX Battery Pack Replacement: passo 5, imagem 1 %32 Palm TX Battery Pack Replacement: passo 5, imagem 2 %32

    • Use a plastic opening tool to peel the battery pack from the back panel.

    • The battery pack is glued to the back panel so removing it may require considerable effort.

    Editar

  7. Palm TX Battery Pack Replacement, Battery Pack: passo 6, imagem 1 %32 Palm TX Battery Pack Replacement, Battery Pack: passo 6, imagem 2 %32

    • Use a soldering iron to disconnect the battery wires from the motherboard.

    • For soldering instructions, you can view the Soldering Guide.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

5 outras pessoas executaram este guia.

Autor(a)

com 5 outros contribuidores

Spencer Lewson

Membro desde: 01/19/11

793 Reputação

Autoria de 6 guias

Emblemas: 13

+10 outros emblemas

Equipe

Cal Poly, Team 1-15, Amido Winter 2011 Membro de Cal Poly, Team 1-15, Amido Winter 2011

CPSU-AMIDO-W11S1G15

Membros da 4

Autoria de 7 guias

Um comentário

In step 1 - Also remove the cover hinge by sliding downwards

In step 3 - there are actually 2 crevices on the left side of the device. Use the larger, which originally held the cover hinge (the smaller crevice seems to remove the facia)

Jack - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 27

Duração total: 7,052