Introdução

Follow this disassembly to remove the top casing of your laptop.

Peças

Não são necessárias peças.

  1. Turn power off using the power button located in the top left corner of the  keyboard. Press and hold the power button for 3 seconds until it turns off.
    • Turn power off using the power button located in the top left corner of the keyboard. Press and hold the power button for 3 seconds until it turns off.

    Adicionar comentário

  2. Close the laptop and flip it over so that the HP cover logo is on the underside of the laptop.
    • Close the laptop and flip it over so that the HP cover logo is on the underside of the laptop.

    Adicionar comentário

    • Locate the battery and the two switches that release the battery when they are unlocked.

    Adicionar comentário

    • Slide the left switch to the right so that the icon of a locked padlock is no longer visible and the icon of an unlocked padlock is now visible.

    Adicionar comentário

    • With your left hand, slide the right switch to the left and hold it in place. This will unlock the battery and allow you to easily slide it out of its port.

    • While holding the switch in place, use your right hand to gently remove the battery from its port.

    Adicionar comentário

    • Remove the thirteen 7 mm PH1 Phillips head screws from the bottom of the laptop.

    Adicionar comentário

    • Pry up and detach keyboard.

    Adicionar comentário

    • Remove the keyboard connection from the laptop by flipping up the black tab on the ZIF connector.

    Adicionar comentário

    • Remove the palm rest using the blue spudger tool.

    This step is not even close to being descriptive enough. The keyboard underlayment will not easy detach from the palm rest. Damage to the USB port will occur.

    Joe Simmons - Responder

    Where is the removal of the ODD? There are three silver screws.

    briana.dcooper - Responder

    • Remove the five 3 mm PH1 Phillips head screws underneath keyboard.

    Adicionar comentário

    • Remove metal keyboard underlayment.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Benjamin Poirier

Member since: 17-10-2017

242 reputação

2 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 13

Todo: 154