Introdução

The following guide will show the reader how to properly remove the motherboard from the Palm Pre 2.

  1. Make sure your Palm Pre 2 is turned off before taking apart the phone.
    • Make sure your Palm Pre 2 is turned off before taking apart the phone.

    • Snap off the back panel to reveal the battery using the opening tool.

    Adicionar comentário

  2. Pull on the tab to remove the battery.
    • Pull on the tab to remove the battery.

    Adicionar comentário

    • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

    Adicionar comentário

    • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas (Reference the red box in the image).

    • Use tweezers to remove the two antennas from the keypad control board.

    Adicionar comentário

    • Use the opening tool to pry off the (black and yellow) back frame.

    Adicionar comentário

    • Use the opening tool to remove the panel on the main part of the phone.

    • Use the tweezers to get access to remove the panel giving access to the cable connectors.

    • Remove the two ribbon cable connectors using the tweezers.

    Adicionar comentário

    • Use tweezers to separate the keyboard from the phone.

    Adicionar comentário

    • Use a Phillips #0 screwdriver to remove the remaining 4 screws from the main portion of the phone.

    • Use an opening tool to remove the motherboard.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Cole Simmerman

Member since: 08-01-2018

160 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S1-G6, Freund Spring 2018 Membro de IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 60