Introdução

The following guide will show readers how to properly remove the keyboard from the Palm Pre 2.

Make sure your Palm Pre 2 is turned off before taking apart the phone. Snap off the back panel to reveal the battery using the opening tool.
  • Make sure your Palm Pre 2 is turned off before taking apart the phone.

  • Snap off the back panel to reveal the battery using the opening tool.

Adicionar comentário

Pull on the tab to remove the battery. Pull on the tab to remove the battery.
  • Pull on the tab to remove the battery.

Adicionar comentário

Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place. Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.
  • Use the T5 Torx Screwdriver to remove the six screws that hold the back of the frame in place.

Adicionar comentário

Use a spudger to open the hinge that covers the black and white GPS and DIV antennas. Use tweezers to remove the two antennas from the keypad control board.
  • Use a spudger to open the hinge that covers the black and white GPS and DIV antennas.

  • Use tweezers to remove the two antennas from the keypad control board.

Adicionar comentário

Use the opening tool to pry off the (black and yellow) back frame. Use the opening tool to pry off the (black and yellow) back frame.
  • Use the opening tool to pry off the (black and yellow) back frame.

Adicionar comentário

Use the opening tool to remove the panel on the main part of the phone. Use the tweezers to get access to remove the panel giving access to the cable connectors. Remove the two ribbon cable connectors using the tweezers.
  • Use the opening tool to remove the panel on the main part of the phone.

  • Use the tweezers to get access to remove the panel giving access to the cable connectors.

  • Remove the two ribbon cable connectors using the tweezers.

Adicionar comentário

Use tweezers to separate the keyboard from the phone.
  • Use tweezers to separate the keyboard from the phone.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Elliott Van Hoy

Member since: 22-01-2018

256 reputação

2 Guides authored

Equipe

IUPUI, Team S1-G6, Freund Spring 2018 Membro de IUPUI, Team S1-G6, Freund Spring 2018

IUPUI-FREUND-S18S1G6

2 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 38