Ir para o conteúdo principal

Palm P101UNA Flash Bulb Replacement

O que você precisa

  1. Palm P101UNA Flash Bulb Replacement, Battery: passo 1, imagem 1 %32
    • Push in the button at the bottom of the phone, and lift the back cap off.

  2. Palm P101UNA Flash Bulb Replacement: passo 2, imagem 1 %32
    • Remove the battery by pulling out the little tab.

  3. Palm P101UNA Flash Bulb Replacement, Flash Bulb: passo 3, imagem 1 %32
    • Using the 1.5mm hex screwdriver, remove the 6 hex screws from the inner-most casing.

  4. Palm P101UNA Flash Bulb Replacement: passo 4, imagem 1 %32
    • Using the spudger, remove the inner case from the phone.

  5. Palm P101UNA Flash Bulb Replacement: passo 5, imagem 1 %32 Palm P101UNA Flash Bulb Replacement: passo 5, imagem 2 %32
    • Using your spudger, slowly apply pressure on the bulb until it comes loose.

Conclusão

To reassemble your device, follow these instructions in reverse order.

ironwill13791

Membro desde: 10/30/13

509 Reputação

Autoria de 5 guias

Equipe

UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013 Membro de UMass Dartmouth, Team 2-2, Gulbrandsen Fall 2013

UMASSD-GULBRANDSEN-F13S2G2

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 3

Duração total: 202