Introdução

Removing the batteries is a very simple process that is also a preliminary step to gaining access to the inside of the device.

Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover. Turn the device over so it is face down and remove the stylus, and battery cover.
  • Turn the device over so it is face down and remove the stylus, and battery cover.

Adicionar comentário

Now remove the two batteries by pulling on the cloth black tab. Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.
  • Now remove the two batteries by pulling on the cloth black tab.

    • Remember, when inserting the batteries, to keep the tab below them to make it easier to remove the batteries in the future.

  • If this tab is not visible, use the flat head screwdriver and gently pry out the batteries by pushing on the positive end (opposite the spring).

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jacob

Member since: 15-04-2010

1 reputação

3 Guides authored

Equipe

Cal Poly, Team 16-1, Maness Spring 2010 Membro de Cal Poly, Team 16-1, Maness Spring 2010

CPSU-MANESS-S10S16G1

4 Membros

4 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,542