Outdoor Gate Deadbolt Replacement

Introdução

This guide will easily help you attach an out door doorknob. The resources needed to fix the doorknob would be a cross head screwdriver and new doorknob. There aren't any precautions when getting this done so I'd suggest this to be some type of bonding time between you and a loved one.

O que você precisa

Passo 1 Deadbolt

Outdoor Gate Deadbolt Replacement, Deadbolt: passo 1, imagem 1 %32

Outdoor Gate Deadbolt Replacement, Deadbolt: passo 1, imagem 2 %32

Outdoor Gate Deadbolt Replacement, Deadbolt: passo 1, imagem 3 %32

Remove the old deadbolt.
The gate should look like this prior to beginning.

Editar

Passo 2

Outdoor Gate Deadbolt Replacement: passo 2, imagem 3 %32

Begin pushing the latch inward from the front face of the bolts.
Adjust the inside by holding it with both fingers.
Begin to screw both of the short screws into our middle side area of the latch.

Editar

Passo 3

Outdoor Gate Deadbolt Replacement: passo 3, imagem 3 %32

Grab both of the long screws.
Adjust the back head of the doorknob to be facing in a straight upward position.
Once everything is positioned right, begin screwing in the long screws.
Make sure the screws are properly tightened.

Editar

Passo 4

Outdoor Gate Deadbolt Replacement: passo 4, imagem 3 %32

Allow the back end of the doorknob to be properly aligned with the front head when attaching.
Once both parts are attached and alined begin screwing in the screws fully inwards.

Editar