Conserte seus objetos Comunidade Loja

Oster BLSTSS-PZO Power Cord Replacement

Introdução

The power cord is responsible for providing power to your device. This guide will instruct you on how to replace the power cord.

O que você precisa

  1. Oster BLSTSS-PZO Power Cord Replacement, Circuitboard: passo 1, imagem 1 %32

    • Use the prying tools to open the four plastic screw holes on the bottom of the blender.

    Editar

  2. Oster BLSTSS-PZO Power Cord Replacement: passo 2, imagem 1 %32

    • Use the Phillips #1 Screwdriver to unscrew the four 16 mm screws and remove the plastic bottom.

    Editar

  3. Oster BLSTSS-PZO Power Cord Replacement: passo 3, imagem 1 %32

    • Gently remove the circuit board.

    Editar

  5. Oster BLSTSS-PZO Power Cord Replacement: passo 4, imagem 1 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 4, imagem 2 %32

    • Use the spudger to detach the black wire from the circuit board.

    • Repeat for yellow wire.

    Editar

  6. Oster BLSTSS-PZO Power Cord Replacement: passo 5, imagem 1 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 5, imagem 2 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 5, imagem 3 %32

    • Use the Phillips #1 to remove the four 8mm screws.

    • Use the medal spudger to detach the circuit board from the buttons.

    • Gently pull and release circuit board from buttons.

    Editar

  7. Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, imagem 1 %32 Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, imagem 2 %32 Oster BLSTSS-PZO Power Cord Replacement, Power Cord: passo 6, imagem 3 %32

    • Locate petal prong on the end of the power cord.

    • Bend metal prong until it's straight with your finger.

    Editar

  8. Oster BLSTSS-PZO Power Cord Replacement: passo 7, imagem 1 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 7, imagem 2 %32

    • Spring will pop out when you pull out metal prong

    • Pull prong out of the hole.

    Editar

  9. Oster BLSTSS-PZO Power Cord Replacement: passo 8, imagem 1 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 8, imagem 2 %32 Oster BLSTSS-PZO Power Cord Replacement: passo 8, imagem 3 %32

    • Pinch plastic prongs on base of blender to remove plastic securing device.

    • Remove plastic securing device.

    • Pull power cord out of blender base.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 5

Duração total: 194