Pular para o conteúdo principal

Introdução

This guide shows how to disassemble the Osram Lightify gateway.

Peças

Nenhum componente especificado.

  1. Remove the front using a metal spudger.
    • Remove the front using a metal spudger.

    • Once you can get your fingers in, remove the rest using your hand.

  2. On the back of the front cover, remove the white plastic using a metal spudger. Remove the PCB using a spudger
    • On the back of the front cover, remove the white plastic using a metal spudger.

    • Remove the PCB using a spudger

  3. Once the PCB is removed, use a Torx T9 screwdriver to unscrew and remove the power supply. Remove the screws holding on the back cover with a Torx T9 screwdriver and remove the back cover.
    • Once the PCB is removed, use a Torx T9 screwdriver to unscrew and remove the power supply.

    • Remove the screws holding on the back cover with a Torx T9 screwdriver and remove the back cover.

    • all the screws are the same. they can be mixed with no problem.

  4. Remove the button by grabbing the tab over the button and pulling it out. it will not come out if the button is not depressed. Remove both metal sheets. when its at an angle, push it in a little and then pull it up so that it is pointing straight up. then, you can push it through.
    • Remove the button by grabbing the tab over the button and pulling it out.

    • it will not come out if the button is not depressed.

    • Remove both metal sheets. when its at an angle, push it in a little and then pull it up so that it is pointing straight up. then, you can push it through.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Aiden Baker

Membro desde: 19-09-2015

12.241 reputação

22 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Todo: 97