Conserte seus objetos Comunidade Loja

Oregon Scientific Meep! X2 Battery Replacement

Introdução

Use this guide to help repair a faulty battery in the Oregon Scientific Meep! X2 tablet.

O que você precisa

  1. Oregon Scientific Meep! X2 Battery Replacement, Rear Casing: passo 1, imagem 1 %32

    • Remove the orange covers from the left and right sides of the device by sliding up against the tabs.

    Editar

  2. Oregon Scientific Meep! X2 Battery Replacement: passo 2, imagem 1 %32 Oregon Scientific Meep! X2 Battery Replacement: passo 2, imagem 2 %32 Oregon Scientific Meep! X2 Battery Replacement: passo 2, imagem 3 %32

    • You can remove the rear casing by unscrewing all six phillips #00(3.5mm x 4.5mm)screws from the left and right side of the device.

    Editar

  4. Oregon Scientific Meep! X2 Battery Replacement: passo 3, imagem 1 %32 Oregon Scientific Meep! X2 Battery Replacement: passo 3, imagem 2 %32 Oregon Scientific Meep! X2 Battery Replacement: passo 3, imagem 3 %32

    • Use the plastic opening tools to undo the clips around the edges of the device.

    Editar

  5. Oregon Scientific Meep! X2 Battery Replacement, Remove the ribbon cable.: passo 4, imagem 1 %32 Oregon Scientific Meep! X2 Battery Replacement, Remove the ribbon cable.: passo 4, imagem 2 %32 Oregon Scientific Meep! X2 Battery Replacement, Remove the ribbon cable.: passo 4, imagem 3 %32

    • Gently unhook the black security clips to loosen the ribbon cable. Use one of the plastic opening tools.

    • Pull lightly on the ribbon cable to remove it.

    Editar

  6. Oregon Scientific Meep! X2 Battery Replacement, Sever the adhesive glue on the battery.: passo 5, imagem 1 %32 Oregon Scientific Meep! X2 Battery Replacement, Sever the adhesive glue on the battery.: passo 5, imagem 2 %32

    • Use your spudger to separate the battery from the adhesive glue strips and plastic film.

    Editar

  7. Oregon Scientific Meep! X2 Battery Replacement: passo 6, imagem 1 %32 Oregon Scientific Meep! X2 Battery Replacement: passo 6, imagem 2 %32

    • Use a soldering station to unsolder the battery wires from the motherboard.

    • In the case of screen or screen sensor replacement, disregard desoldering steps.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

J'mel Henneman

Membro desde: 01/20/15

864 Reputação

Autoria de 8 guias

Emblemas: 11

+8 outros emblemas

Equipe

USF Tampa, Team 9-1, Blackwell Winter 2015 Membro de USF Tampa, Team 9-1, Blackwell Winter 2015

USFT-BLACKWELL-W15S9G1

Membros da 3

Autoria de 16 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 1,456