Introdução
By following the steps in this guide in order, you will be able to remove and replace the broken motherboard of your Oregon Scientific Meep! 4.0 tablet.
O que você precisa
-
-
Use a screwdriver to remove the four 7.0 mm Philips #00 screws from the back of the device.
-
-
-
-
Use a soldering station to disconnect any wires attached to the motherboard.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.
Equipe
University of Tampa, Team 1-3, Whiteside Fall 2015 Membro de University of Tampa, Team 1-3, Whiteside Fall 2015
UT-WHITESIDE-F15S1G3
Membros da 3
Autoria de 12 guias
