Conserte seus objetos Comunidade Loja

Orbic Wonder Speaker Replacement

O que você precisa

  1. Orbic Wonder Speaker Replacement, Battery: passo 1, imagem 1 %32 Orbic Wonder Speaker Replacement, Battery: passo 1, imagem 2 %32 Orbic Wonder Speaker Replacement, Battery: passo 1, imagem 3 %32

    • Remove two 2mm TR9 Torx screws from the bottoms of the device.

    Editar

  2. Orbic Wonder Speaker Replacement: passo 2, imagem 1 %32 Orbic Wonder Speaker Replacement: passo 2, imagem 2 %32 Orbic Wonder Speaker Replacement: passo 2, imagem 3 %32

    • There is a border between the black phone backing and the silver screen.

    • Place the Jimmy in this border, and cautiously torque it back and forth to part the two halves.

    • When the halves are parted correctly, the gap should look like this.

    • Be careful to avoid damaging any connecting circuitry between the two halves.

    Editar

  3. Orbic Wonder Speaker Replacement: passo 3, imagem 1 %32 Orbic Wonder Speaker Replacement: passo 3, imagem 2 %32 Orbic Wonder Speaker Replacement: passo 3, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Anti-Static Wrist Strap
    $7.95
    Comprar

    • Before continuing, tighten the anti-static wrist strap around your wrist and connect the alligator clips to a metal portion of the phone.

    • On the upper right side, there is a black ribbon cable in the shape of an “L”. Remove the single 1 mm Phillips #000 screw on the left side of the ribbon cable.

    Editar

  5. Orbic Wonder Speaker Replacement: passo 4, imagem 1 %32 Orbic Wonder Speaker Replacement: passo 4, imagem 2 %32 Orbic Wonder Speaker Replacement: passo 4, imagem 3 %32

    • Use a pair of angled tweezers to carefully remove the metal casing of the ribbon cable.

    • Use a pair of angled tweezers to detach the black ribbon cable. This is done to unplug the battery.

    Editar

  6. Orbic Wonder Speaker Replacement: passo 5, imagem 1 %32 Orbic Wonder Speaker Replacement: passo 5, imagem 2 %32 Orbic Wonder Speaker Replacement: passo 5, imagem 3 %32

    • There is a black flap on the bottom of the battery.

    • Using your fingers, pinch this flap and carefully pull the battery up and out of the phone.

    Editar

  7. Orbic Wonder Speaker Replacement, Speaker: passo 6, imagem 1 %32 Orbic Wonder Speaker Replacement, Speaker: passo 6, imagem 2 %32 Orbic Wonder Speaker Replacement, Speaker: passo 6, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Anti-Static Wrist Strap
    $7.95
    Comprar

    • Remove the anti-static wrist strap.

    • Use the Phillips #000 screwdriver to remove the five black 2 mm screws.

    • Use the Phillips #000 screwdriver to remove the two grey 2 mm screws.

    Editar

  8. Orbic Wonder Speaker Replacement: passo 7, imagem 1 %32 Orbic Wonder Speaker Replacement: passo 7, imagem 2 %32

    • Use a pair of angled tweezers to remove the speaker housing.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 4

Últimos 30 dias: 11

Duração total: 438