Ir para o conteúdo principal

Introdução

Replace the power fuse for the Onkyo TX800 receiver.

  1. Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place. Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place. Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.
    • Remove the two screws on both sides of the receiver. Keep these and the rest of the screws in a safe place.

  2. Remove the top screw on the back panel. Remove the top screw on the back panel.
    • Remove the top screw on the back panel.

  3. Slide off the case to expose the internal components of the receiver. Slide off the case to expose the internal components of the receiver.
    • Slide off the case to expose the internal components of the receiver.

  4. Locate the fuse. Locate the fuse.
    • Locate the fuse.

  5. Gently wedge a small screwdriver in between one side of the fuse and the contact. Remove the fuse with your thumb and forefinger.
    • Gently wedge a small screwdriver in between one side of the fuse and the contact.

    • Remove the fuse with your thumb and forefinger.

  6. Examine the fuse. If the wire within it is broken, you will need to replace it with a new 125 Volt, 4 Amp fuse.
    • Examine the fuse. If the wire within it is broken, you will need to replace it with a new 125 Volt, 4 Amp fuse.

Linha de Chegada

4 outras pessoas concluíram este guia.

Michael Lady

Membro desde: 09-04-2010

241 Reputation

2 Guias de autoria

Team

Cal Poly, Team 27-92, Amido Spring 2010 Membro de Cal Poly, Team 27-92, Amido Spring 2010

CPSU-AMIDO-S10S27G92

4 Membros

7 Guias de autoria

Thanks for clear instructions!

Andy Dersch - Responder

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 28

Past 30 Days: 136

All Time: 10,180