Ir para o conteúdo principal

Omaker M4 Port Cover Replacement

O que você precisa

  1. Omaker M4 Port Cover Replacement, Back Case: passo 1, imagem 1 %32
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Omaker M4 Port Cover Replacement: passo 2, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 2, imagem 2 %32
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Omaker M4 Port Cover Replacement: passo 3, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 3, imagem 2 %32
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Omaker M4 Port Cover Replacement: passo 4, imagem 1 %32
    • Carefully remove the back cover without breaking the battery wire.

  5. Omaker M4 Port Cover Replacement: passo 5, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 5, imagem 2 %32
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

  6. Omaker M4 Port Cover Replacement, Motherboard: passo 6, imagem 1 %32 Omaker M4 Port Cover Replacement, Motherboard: passo 6, imagem 2 %32
    • Remove the mic wire by carefully pulling the plug out of the socket.

  7. Omaker M4 Port Cover Replacement: passo 7, imagem 1 %32
    • Remove the speaker wire by carefully pulling the plug out of the socket on the motherboard.

  8. Omaker M4 Port Cover Replacement: passo 8, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 8, imagem 2 %32
    • Use Phillips PH00 screwdriver to remove the three screws holding the motherboard in place.

  9. Omaker M4 Port Cover Replacement: passo 9, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 9, imagem 2 %32
    • Remove the screws using the screwdriver.

    • Since the screws that hold the motherboard in place are smaller, the screwdriver is able to pick them up.

  10. Omaker M4 Port Cover Replacement: passo 10, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 10, imagem 2 %32
    • Carefully remove the motherboard with your hand by lifting it from the device.

  11. Omaker M4 Port Cover Replacement, Port Cover: passo 11, imagem 1 %32 Omaker M4 Port Cover Replacement, Port Cover: passo 11, imagem 2 %32
    • Separate the port cover from the device using your hands.

  12. Omaker M4 Port Cover Replacement: passo 12, imagem 1 %32
    • Orient the device so the port cover is on your left.

  13. Omaker M4 Port Cover Replacement: passo 13, imagem 1 %32 Omaker M4 Port Cover Replacement: passo 13, imagem 2 %32
    • Using Tweezers, pinch the larger part of the stem

  14. Omaker M4 Port Cover Replacement: passo 14, imagem 1 %32
    • Use your left hand to pull while at the same time use the tweezers to compress the stem, carefully remove the port cover from the device.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Obaida Matar

Membro desde: 02/17/16

119 Reputação

Autoria de 1 guia

Equipe

USF Tampa, Team 2-2, Sullivan Spring 2016 Membro de USF Tampa, Team 2-2, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G2

Membros da 3

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 365