Ir para o conteúdo principal

Omaker M4 Back Case Replacement

O que você precisa

  1. Omaker M4 Back Case Replacement, Back Case: passo 1, imagem 1 %32
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Omaker M4 Back Case Replacement: passo 2, imagem 1 %32 Omaker M4 Back Case Replacement: passo 2, imagem 2 %32
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Omaker M4 Back Case Replacement: passo 3, imagem 1 %32 Omaker M4 Back Case Replacement: passo 3, imagem 2 %32
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Omaker M4 Back Case Replacement: passo 4, imagem 1 %32
    • Carefully remove the back cover without breaking the battery wire.

  5. Omaker M4 Back Case Replacement: passo 5, imagem 1 %32 Omaker M4 Back Case Replacement: passo 5, imagem 2 %32
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas executaram este guia.

[deleted]

Membro desde: 02/17/16

679 Reputação

Autoria de 4 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 5

Duração total: 793