Conserte seus objetos Comunidade Loja

Olympus TG-820 iHS Locking Mechanism Replacement

Introdução

Are the seals on your locking mechanism wearing down? This guide will provide assistance in replacing and improving the water capability of your camera.

O que você precisa

  1. Olympus TG-820 iHS Locking Mechanism Replacement, Battery: passo 1, imagem 1 %32

    • Orient camera to look directly at battery compartment side as shown.

    Editar

  2. Olympus TG-820 iHS Locking Mechanism Replacement: passo 2, imagem 1 %32 Olympus TG-820 iHS Locking Mechanism Replacement: passo 2, imagem 2 %32 Olympus TG-820 iHS Locking Mechanism Replacement: passo 2, imagem 3 %32

    • Locate the two latches on the battery compartment.

    • First, move the "lock" switch left to reveal red indicator.

    • Next, move the "cover latch" switch downward to reveal red indicator.

    • You have to move the switches in that order for the compartment to unlatch.

    Editar

  4. Olympus TG-820 iHS Locking Mechanism Replacement: passo 3, imagem 1 %32 Olympus TG-820 iHS Locking Mechanism Replacement: passo 3, imagem 2 %32

    • Allow the battery compartment latch to completely open.

    • Insert battery with the writing face up.

    • The bigger slot is for the battery. The smaller slot is for the memory card.

    • Battery not shown.

    Editar

  5. Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: passo 4, imagem 1 %32 Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: passo 4, imagem 2 %32 Olympus TG-820 iHS Locking Mechanism Replacement, Locking Mechanism: passo 4, imagem 3 %32

    • Locate and remove the 4.7mm Phillips #000 screw on the back side of the battery compartment locking mechanism.

    • Locate and remove the 4.7mm Phillips #000 screw on the front side of the battery compartment locking mechanism.

    Editar

  6. Olympus TG-820 iHS Locking Mechanism Replacement: passo 5, imagem 1 %32

    • Locate the two screws on the side of the battery compartment.

    • Remove the two 4.85mm Phillips #000 screws.

    Editar

  7. Olympus TG-820 iHS Locking Mechanism Replacement: passo 6, imagem 1 %32 Olympus TG-820 iHS Locking Mechanism Replacement: passo 6, imagem 2 %32

    • Once all 4 screws are out, the back panel of the battery compartment will come off.

    • The entire battery compartment cover will also detach from the camera.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Larissa Knight

Membro desde: 03/21/16

549 Reputação

Autoria de 5 guias

Emblemas: 10

+7 outros emblemas

Equipe

Clemson, Team 7-2, Benson Spring 2016 Membro de Clemson, Team 7-2, Benson Spring 2016

CLEM-BENSON-S16S7G2

Membros da 4

Autoria de 16 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 12

Duração total: 445