Ir para o conteúdo principal

Olympus Stylus Tough 6020 Flash Replacement

O que você precisa

  1. Olympus Stylus Tough 6020 Flash Replacement, Battery: passo 1, imagem 1 %32
    • Slide and push the battery casing to open it.

    • Push the battery to eject it.

  2. Olympus Stylus Tough 6020 Flash Replacement, Bottom Plating: passo 2, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Bottom Plating: passo 2, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Bottom Plating: passo 2, imagem 3 %32
    • Turn the camera so that you are facing the bottom of the camera.

    • Using a Phillips 00 screwdriver, unscrew the three 3.9mm screws on the bottom of the camera.

    • Using a spudger, pry off the plating on the bottom of the camera.

  3. Olympus Stylus Tough 6020 Flash Replacement, Top Plating: passo 3, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Top Plating: passo 3, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Top Plating: passo 3, imagem 3 %32
    • Turn the camera so that you are facing the top of the camera.

    • Using a Phillips 00 screwdriver, unscrew the three 3.9mm screws located on the top of the camera.

    • Using a spudger, pry off the plating on the top of the camera.

  4. Olympus Stylus Tough 6020 Flash Replacement, Left Plating: passo 4, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Left Plating: passo 4, imagem 2 %32
    • Turn the camera so the LCD is facing upwards.

    • Using a Phillips 00 screwdriver, unscrew the two 3.9mm screws located on the left side of the device.

  5. Olympus Stylus Tough 6020 Flash Replacement, Black "Olympus" Face Plate: passo 5, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Black "Olympus" Face Plate: passo 5, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Black "Olympus" Face Plate: passo 5, imagem 3 %32
    • Using a Phillips 00 screwdriver, unscrew the 3.9mm screw located next to the black "Olympus" face plate.

    • Using a T6 Torx screwdriver, unscrew the two 3.5mm screws located on the black "Olympus" face plate.

    • Using a spudger, gently pry off the black "Olympus" face plate.

  6. Olympus Stylus Tough 6020 Flash Replacement, End Casing: passo 6, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, End Casing: passo 6, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, End Casing: passo 6, imagem 3 %32
    • Using a Phillips 00 screwdriver, unscrew the two 3.9mm screws to the right of the cursor pad on the U-shaped frame.

    • Turn the device over so the front of the camera is facing you.

    • Using a Phillips 00 screwdriver, unscrew the two 3.9mm screws on the end casing.

    • Using a spudger, pry off the end casing.

  7. Olympus Stylus Tough 6020 Flash Replacement, Blue Face Plate: passo 7, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Blue Face Plate: passo 7, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Blue Face Plate: passo 7, imagem 3 %32
    • Turn the camera so the blue face plate is visible.

    • Using a Phillips 00 screwdriver, unscrew the two 3mm screws on the blue plate.

    • Using a Phillips 00 screwdriver, unscrew the 3.9mm screw located at the bottom of the camera straight down from the flash.

    • Using a spudger, gently pry off the blue face plate.

  8. Olympus Stylus Tough 6020 Flash Replacement, Back Plate: passo 8, imagem 1 %32
    • Using a Phillips 00 screwdriver, unscrew the 9mm screws on the top of the camera to the right of the flash.

  9. Olympus Stylus Tough 6020 Flash Replacement: passo 9, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement: passo 9, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement: passo 9, imagem 3 %32
    • Using a Phillips 00 screwdriver, unscrew the wide 3.5mm screw located in the middle of the camera.

    • Using a Phillips 00 screwdriver, unscrew the 9mm screw located at the top left corner of the camera.

    • Using a spudger, separate the black plate from the camera.

  10. Olympus Stylus Tough 6020 Flash Replacement, Back Panel: passo 10, imagem 1 %32
    • Using tweezers, gently pull the ribbon cables to disconnect them from the motherboard.

    • Using your hands, grab the panel to remove it.

    • Set the back panel aside.

  11. Olympus Stylus Tough 6020 Flash Replacement, Motherboard: passo 11, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Motherboard: passo 11, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Motherboard: passo 11, imagem 3 %32
    • Using the Phillips #00 Screwdriver, unscrew the four 3.9mm screws from the center metal panel.

    • Using the tweezers, pull the metal panel to remove it from the motherboard.

    • Using the tweezers, disconnect the ribbon cable from the motherboard.

    • Using the Phillips #00 Screwdriver, unscrew the two 3.9mm screws on the top left and bottom left of the motherboard.

    • Using the tweezers, disconnect the ribbon cable from the bottom left of the motherboard.

    • Using the spudger, gently pry the motherboard from the casing.

  12. Olympus Stylus Tough 6020 Flash Replacement, Capacitor Case: passo 12, imagem 1 %32
    • Using your hands, separate the black frame from the motherboard.

    • Using your hands, separate the metal plate from between the flash casing and the motherboard.

  13. Olympus Stylus Tough 6020 Flash Replacement, Capacitor: passo 13, imagem 1 %32 Olympus Stylus Tough 6020 Flash Replacement, Capacitor: passo 13, imagem 2 %32 Olympus Stylus Tough 6020 Flash Replacement, Capacitor: passo 13, imagem 3 %32
    • Using the tweezers, grab and pull the yellow tape off the blue and white wires.

    • Using the soldering station, desolder the blue wire from the back of the motherboard.

    • Using the spudger, carefully pry the capacitor from the flash casing.

    • If the capacitor is touched, you could get shocked.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 2

Duração total: 338