Peças

Não são necessárias peças.

Remove the 2 screws from the bottom of the camera
  • Remove the 2 screws from the bottom of the camera

Adicionar comentário

Remove the screw from the right side of the camera.
  • Remove the screw from the right side of the camera.

Adicionar comentário

  • Remove the two screws from the left side of the camera

Adicionar comentário

  • Separate the front casing from the back using a plastic opening tool, gently.

  • Silver band and buttons will become loose when you remove the two pieces.

Adicionar comentário

  • Pull the silver bracket and buttons off of the camera

Adicionar comentário

  • Remove the 2 screws on the right side of the camera.

  • Remove the 2 screws on the left side of the camera.

  • Circuit ribbon is attached at the top-left of the camera. Be careful when separating the front and back of the camera.

  • Pull the camera apart into 2 separate pieces.

Adicionar comentário

  • Flip up clip on circuit ribbon, carefully

  • Detach the ribbon from the rear to the front and pull it out, gently.

Adicionar comentário

  • You will be left with four major pieces

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Tracy Donovan

Member since: 10-02-2012

13 reputação

Autoria de 1 guia

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 4

Todo: 378