Ir para o conteúdo principal

Olympus Pen E-PL7 LCD Screen Replacement

O que você precisa

  1. Olympus Pen E-PL7 LCD Screen Replacement, Battery: passo 1, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement, Battery: passo 1, imagem 2 %32
    • Turn the camera upside down.

    • Push the grey tab to the right to open the battery compartment.

    • Pull out the battery.

    • The battery is not shown in these photos.

  2. Olympus Pen E-PL7 LCD Screen Replacement, LCD Screen: passo 2, imagem 1 %32
    • Use a Phillips #00 screwdriver to remove the three 2.3 mm screws from the base of the LCD screen.

  3. Olympus Pen E-PL7 LCD Screen Replacement: passo 3, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 3, imagem 2 %32
    • Fully extend the LCD assembly.

  4. Olympus Pen E-PL7 LCD Screen Replacement: passo 4, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 4, imagem 2 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 4, imagem 3 %32
    • Remove the two 2.2 mm Phillips screws located on the back of the LCD screen.

    • Use tweezers to remove the top LCD bracket.

  5. Olympus Pen E-PL7 LCD Screen Replacement: passo 5, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 5, imagem 2 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 5, imagem 3 %32
    • Use a Phillips #00 screwdriver to remove the four 1.4 mm screws from the back of the LCD screen.

    • Remove the LCD ribbon cable with a pair of tweezers.

    • The cover may fall off after the screws have been removed.

  6. Olympus Pen E-PL7 LCD Screen Replacement: passo 6, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 6, imagem 2 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 6, imagem 3 %32
    • Carefully lift the LCD screen up and away from the assembly.

    • Do not attempt to fully remove the screen, as it is attached to the assembly by a ribbon cable.

  7. Olympus Pen E-PL7 LCD Screen Replacement: passo 7, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 7, imagem 2 %32
    • Use tweezers to peel back the plastic cover.

  8. Olympus Pen E-PL7 LCD Screen Replacement: passo 8, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 8, imagem 2 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 8, imagem 3 %32
    • Use a spudger to flip back the black bar on the LCD Ribbon ZIF connector.

  9. Olympus Pen E-PL7 LCD Screen Replacement: passo 9, imagem 1 %32 Olympus Pen E-PL7 LCD Screen Replacement: passo 9, imagem 2 %32
    • Gently pull the ribbon cable out with tweezers.

  10. Olympus Pen E-PL7 LCD Screen Replacement: passo 10, imagem 1 %32
    • Remove the LCD Screen.

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas executaram este guia.

Kelsea Weber

Membro desde: 11/12/15

19.873 Reputação

Autoria de 32 guias

Equipe

iFixit Membro de iFixit

Staff

Membros da 135

Autoria de 16.817 guias

7 comentários

Magnifico

Great Work!!

apuntotres - Responder

Where can I buy a replacement LCD screen?

Joshua Almeida - Responder

You don't show the final part taking the glass away from outer and the board, as the screen replacements don't come with connector board

josollis - Responder

@josollis: Thanks for the hint! I got the missing info from the E-P5 LCD exchange instructions (on ifixit).

Stephan Fagerer - Responder

I have reassembled the unit after replacing the broken Ribbon, however my LCD images are inverted in normal mode not selfie mode. Do anyone know why ?

Thanks in advance

ah to lee - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 17

Últimos 30 dias: 82

Duração total: 9,840