Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Olympus D590 Face Plate Replacement

O que você precisa

  1. Olympus D590 Face Plate Replacement, Face Plate: passo 1, imagem 1 %32
    • Flip camera so you are looking at the bottom.

    • Unscrew all 5 base plate screws.

  2. Olympus D590 Face Plate Replacement: passo 2, imagem 1 %32
    • Lift open retainer clip by sliding the clip to the left and letting the clip pop up.

  3. Olympus D590 Face Plate Replacement: passo 3, imagem 1 %32
    • Unscrew the single screw located next to the battery slot.

  4. Olympus D590 Face Plate Replacement: passo 4, imagem 1 %32
    • Turn the camera so that the USB, AV and DC in/out rubber plate it facing you.

    • Lift the rubber plate exposing the ports beneath.

  5. Olympus D590 Face Plate Replacement: passo 5, imagem 1 %32
    • Unscrew the 2 screws next to the USB and AC ports.

  6. Olympus D590 Face Plate Replacement: passo 6, imagem 1 %32
    • Use a flathead screwdriver or another flat opening tool to pry the faceplate from the whole device.

  7. Olympus D590 Face Plate Replacement: passo 7, imagem 1 %32
    • Pull off the faceplate to reveal the inside of the camera.

    • Be careful of the connector that goes from the faceplate to the motherboard . Disconnecting this line will cause the camera not not power on through the on/off switch anymore.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Katie

Membro desde: 04/15/10

31 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 28-23, Regan Spring 2010 Membro de Cal Poly, Team 28-23, Regan Spring 2010

CPSU-REGAN-S10S28G23

Membros da 4

Autoria de 14 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Duração total: 1,599