Introdução

Step by step instructions to clean or replace the control buttons on the camera.

Peças

Não são necessárias peças.

  1. Before disassembling your camera, be sure it is powered off.
    • Before disassembling your camera, be sure it is powered off.

    • Remove two screws from the video port located at the side panel of the camera.

    • Remove three screws from the bottom panel of the camera.

    Adicionar comentário

  2. Open the USB port cover, and remove three screws from inside.
    • Open the USB port cover, and remove three screws from inside.

    • Next, open the memory slot cover and remove the screw.

    Adicionar comentário

    • Use the blue opening tool to loosen and separate the back cover from the camera.

    Adicionar comentário

    • Locate and unscrew the three screws inside the back cover body (picture 3) .

    • Remove button pad assembly from the back cover.

    Adicionar comentário

    • The button assembly is now separate from the back cover.

    • Inspect for broken areas. Replace or clean the button parts.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

GradStudents2011

Member since: 08-09-2011

21 reputação

3 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Todo: 718