Introdução

We will show how to tear down to and remove the LCD screen.

  1. Unscrew all immediately visible screws on the body of the camera.
    • Unscrew all immediately visible screws on the body of the camera.

    • Locations (# of screws): Bottom of camera (3), left side near video port (2), under cover of USB slot (3), memory card slot (1).

    Adicionar comentário

  2. Use the plastic opening tool to separate the back cover from the camera.
    • Use the plastic opening tool to separate the back cover from the camera.

    Adicionar comentário

    • With the back plate off, locate two screws: one diagonal from the top left of the LCD screen and one diagonal from the top right of the LCD screen.

    • Unscrew both of these screws.

    Adicionar comentário

    • Flip the LCD screen over.

    Adicionar comentário

    • Undo the clip holding the ribbon cable that attaches the LCD screen to the motherboard.

    Adicionar comentário

    • Unclip the plug attached to the red and white wires that connects the LCD screen to the motherboard.

    Adicionar comentário

    • The LCD screen housing should now be free of the camera.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

GradStudents2011

Member since: 08-09-2011

21 reputação

3 Guides authored

Equipe

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 954