Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

OLPC XO-4 Touch Screen Replacement

Escrito Por: Zach Yasuda (e 7 outros contribuidores)
  • Comentários: 0
  • Favoritos: 1
  • Execuções: 2

Dificuldade

Moderado

Passos

11

Tempo necessário

15 minutos

Partes

3

Sinalizadores

1

Featured Student Guide

Guia do aluno destaque

Este guia tem sido o trabalho duro de nossos alunos incríveis e é considerado extremamente bacana pelo equipe da iFixit.

Introdução

Learn how to replace the display screen on the XO-4 Touch.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Turn the laptop upside-down, with the handle facing away from you.

    • Turn the laptop upside-down, with the handle facing away from you.

    Editar

  2. Pull the lock tabs towards the green outer edges of the laptop. Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

    • Pull the lock tabs towards the green outer edges of the laptop.

    • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

    Editar

  3. Lift up on the middle of the battery to remove it from the device. Lift up on the middle of the battery to remove it from the device.

    • Lift up on the middle of the battery to remove it from the device.

    Editar

  4. Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side. Rotate the screen 180° and remove the other two screws. You will have to put your screwdriver through the handle in order to reach the middle screw for both sides.

    • Remove the two 4mm Phillips #1 screws underneath the screen on the right-hand side.

    • Rotate the screen 180° and remove the other two screws.

    • You will have to put your screwdriver through the handle in order to reach the middle screw for both sides.

    Editar

  5. Kit de pontas universal para chave

    112 bits for every fix.

    Upgrade Your Toolbox

    Kit de pontas universal para chave

    Upgrade Your Toolbox

  6. Remove the green side panel by pressing down on the small green button on the top and sliding the panel up. Repeat the step above for the panel on the other side. Repeat the step above for the panel on the other side.

    • Remove the green side panel by pressing down on the small green button on the top and sliding the panel up.

    • Repeat the step above for the panel on the other side.

    Editar

  7. Be careful not to pull the bottom too far out because a ribbon cable is under the frame and can easily break.

    • Be careful not to pull the bottom too far out because a ribbon cable is under the frame and can easily break.

    • Gently lift up the lower part of the frame and pull it down to free the screen frame.

    Editar

  8. Lift the black connector and pull the ribbon cable out by the purple tab, freeing the frame. Lift the black connector and pull the ribbon cable out by the purple tab, freeing the frame.

    • Lift the black connector and pull the ribbon cable out by the purple tab, freeing the frame.

    Editar

  9. Remove the four 7.62mm screws using a Phillips #1 screwdriver.

    • Remove the four 7.62mm screws using a Phillips #1 screwdriver.

    Editar

  10. Be careful not to pull the screen out too far. There are two ribbon cables attached to the screen, and they can easily break. Carefully lift the screen out.

    • Be careful not to pull the screen out too far. There are two ribbon cables attached to the screen, and they can easily break.

    • Carefully lift the screen out.

    Editar

  11. Notice that the laptop in this picture has been turned 180° with the antennas now below the screen. For each ribbon cable, lift up the black connector and gently pull the ribbon cables out by the plastic tabs. For each ribbon cable, lift up the black connector and gently pull the ribbon cables out by the plastic tabs.

    • Notice that the laptop in this picture has been turned 180° with the antennas now below the screen.

    • For each ribbon cable, lift up the black connector and gently pull the ribbon cables out by the plastic tabs.

    Editar

  12. Remove the screen from the laptop.

    • Remove the screen from the laptop.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Autor

com 7 outros contribuidores

Zach Yasuda

Membro desde: 24-01-2013

173 Reputação

2 Guias de autoria

Emblemas: 10

+7 outros emblemas

Equipe

Cal Poly, Team 3-29, Amido Winter 2013 Membro de Cal Poly, Team 3-29, Amido Winter 2013

CPSU-AMIDO-W13S3G29

4 Membros

20 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 7

Duração total: 1,155