Conserte seus objetos

Direito de executar reparos

Loja

OLPC XO-4 Touch Keyboard Replacement

Escrito Por: Michael Kellerman (e 7 outros contribuidores)
  • Comentários: 0
  • Favoritos: 0

Dificuldade

Fácil

Passos

7

Tempo necessário

5 minutos

Partes

2

Sinalizadores

0

Introdução

Use this guide to replace a broken keyboard.

Ferramentas

Comprar estas ferramentas

Peças

Nenhum componente especificado.

  1. Turn the laptop upside-down, with the handle facing away from you.

    • Turn the laptop upside-down, with the handle facing away from you.

    Editar

  2. Pull the lock tabs towards the green outer edges of the laptop. Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

    • Pull the lock tabs towards the green outer edges of the laptop.

    • Hold the left lock tab in the unlock position until the battery is completely removed in the next step.

    Editar

  3. Lift up on the middle of the battery to remove it from the device. Lift up on the middle of the battery to remove it from the device.

    • Lift up on the middle of the battery to remove it from the device.

    Editar

  5. Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs. Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

    • Remove the two 2mm Phillips #1 screws from beneath the battery lock tabs.

    Editar

  6. Flip the laptop over to its normal position. Lift the two antennas on both sides to unlock the screen. Open the laptop.

    • Flip the laptop over to its normal position.

    • Lift the two antennas on both sides to unlock the screen.

    • Open the laptop.

    Editar

  7. Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom. Gently lift up on the back of the keyboard.

    • Be careful not to pull the keyboard too far because there is still a ribbon cable attached to the bottom.

    • Gently lift up on the back of the keyboard.

    • Pull the keyboard up far enough to expose the ribbon cable.

    Editar

  8. Gently lift up on the black connector to release the ribbon cable. Gently pull the blue plastic tab up and away from the black connector.

    • Gently lift up on the black connector to release the ribbon cable.

    • Gently pull the blue plastic tab up and away from the black connector.

    • Remove the keyboard from the laptop.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor

com 7 outros contribuidores

Michael Kellerman

Membro desde: 24/01/2013

46 Reputação

3 Guias de autoria

Emblemas: 3

Equipe

Cal Poly, Team 3-30, Amido Winter 2013 Membro de Cal Poly, Team 3-30, Amido Winter 2013

CPSU-AMIDO-W13S3G30

3 Membros

12 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 3

Últimos 30 dias: 9

Duração total: 522