Introdução

Power cords can be damaged over time due to various causes. This guide will demonstrate how to replace the power cord.

  1. Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws). 2 of the screws will be star shaped rather than phillips head.
    • Unscrew the screws from the base of the blender (These should be 5 gauge phillips head screws).

    • 2 of the screws will be star shaped rather than phillips head.

    • Remove the base plate.

  2. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  3. Identify the red and black wires topped with white-clear caps. Use pliers to squeeze the flattened part of both caps.
    • Identify the red and black wires topped with white-clear caps.

    • Use pliers to squeeze the flattened part of both caps.

    • The black and red wires attached to the power cord should be loose and ready to pull out.

  4. Replace the cord by slipping the new cord's black and red wires into the caps.
    • Replace the cord by slipping the new cord's black and red wires into the caps.

    • Pinch the middle of the cap back to the flattened position using the pliers.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Allie Decker

Member since: 26-09-2017

125 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team S7-G1, Banghart Fall 2017 Membro de Cal Poly, Team S7-G1, Banghart Fall 2017

CPSU-BANGHART-F17S7G1

5 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 6

Últimos 30 dias: 30

Todo: 370