Introdução

Make sure device is unplugged.

Remove slip mat from top of the platter.
  • Remove slip mat from top of the platter.

Adicionar comentário

Remove platter by inserting thumbs in holes and slowly pulling up.
  • Remove platter by inserting thumbs in holes and slowly pulling up.

  • There will be some initial resistance.

Adicionar comentário

Remove damaged belt which will be located below the platter.
  • Remove damaged belt which will be located below the platter.

Adicionar comentário

Install new belt by securing it around the inner ring, located on the back of the platter.
  • Install new belt by securing it around the inner ring, located on the back of the platter.

Adicionar comentário

Place a thumb in each hole.
  • Place a thumb in each hole.

  • You should be able to feel the rubber belt.

  • Gently pull the belt with each thumb, keeping the belt taut around the inner ring.

Adicionar comentário

Secure platter back on turntable while keeping belt taut. Pull belt around motor spindle.
  • Secure platter back on turntable while keeping belt taut.

  • Pull belt around motor spindle.

  • Gently let go of belt.

Adicionar comentário

Test turntable by spinning the platter.
  • Test turntable by spinning the platter.

  • There should be slight tension causing the platter to come to a stop.

Adicionar comentário

Linha de Chegada

Uma outra pessoa concluiu este guia.

Nikolai

Member since: 12-10-2011

161 reputação

5 Guides authored

Equipe

Cal Poly, Team 17-14, Regan Fall 2011 Membro de Cal Poly, Team 17-14, Regan Fall 2011

CPSU-REGAN-F11S17G14

4 Membros

7 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 3

Últimos 7 dias: 12

Últimos 30 dias: 50

Todo: 2,786