Skip to main content

Introdução

Splitting the case of the Mifi 2200 is necessary to be able access the internal parts. This is how to go about that.

Peças

Nenhum componente especificado.

  1. Remove the rear cover by pressing down on the cover and pulling it away from the device.
    • Remove the rear cover by pressing down on the cover and pulling it away from the device.

  2. Place your finger on the back of the battery located near the edge of the device.
    • Place your finger on the back of the battery located near the edge of the device.

    • Push your finger into the battery and lift up to pop the battery out of the device.

  3. Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora

    Kits de reparo de android

    A new screen or battery is one kit away.

    Comprar agora
  4. Using a metal spudger, pry open the device around the seam between the front and back cover.
    • Using a metal spudger, pry open the device around the seam between the front and back cover.

    • It may be difficult to split apart, so use force with caution.

    • It may seem like you are breaking the device, but you will only be breaking the adhesive lining that keeps the device sealed.

  5. Once the seal has been broken all the way around, open the cases using your hands.
    • Once the seal has been broken all the way around, open the cases using your hands.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Justin Russo

Membro desde: 15-04-2012

196 Reputation

3 Guias de autoria

Team

Cal Poly, Team 7-36, Maness Spring 2012 Membro de Cal Poly, Team 7-36, Maness Spring 2012

CPSU-MANESS-S12S7G36

5 Membros

5 Guias de autoria

If case gets damaged, is there a place to but the case

Snehraj Merchant - Responder

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 3

All Time: 1,403