Conserte seus objetos Comunidade Loja

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Nostalgia Electrics RHP-310 Power Switch Replacement

Introdução

If the device will not turn on or has a broken power switch, use this guide to replace the switch.

O que você precisa

  1. Nostalgia Electrics RHP-310 Power Switch Replacement, Power Switch: passo 1, imagem 1 %32

    • Unplug popper.

    • Remove plastic lid by picking the lid up.

    Editar

  2. Nostalgia Electrics RHP-310 Power Switch Replacement: passo 2, imagem 1 %32

    • Flip the popper on its side.

    • Remove the screws on the bottom with the Phillips #2 phillips head screwdriver.

    • There are seven screws on the base. Five screws on the perimeter (12mm Philips #2 screws) and two in the middle (15 mm Philips #2 screws).

    Editar

  4. Nostalgia Electrics RHP-310 Power Switch Replacement: passo 3, imagem 1 %32

    • Remove the base.

    • Save the screws you took out of the bottom in a safe place. They will be needed to reattach the housing to the base.

    • Unscrew the two screws (10 mm Philips #2 screws) from the base.

    • Remove the base and set it aside for now.

    Editar

  5. Nostalgia Electrics RHP-310 Power Switch Replacement: passo 4, imagem 1 %32 Nostalgia Electrics RHP-310 Power Switch Replacement: passo 4, imagem 2 %32

    • Locate the power switch connected to the side of the housing.

    • Carefully pinch the sides of the power switch.

    • Push the power button up and out of the housing.

    Editar

  6. Nostalgia Electrics RHP-310 Power Switch Replacement: passo 5, imagem 1 %32

    • Now that the power switch is removed from the housing, you have to remove the wires connected to the power switch.

    • Use the plastic opening tool to gently pry the wires loose from the power switch.

    • The wires should pop easily out from the power switch.

    Editar

  7. Nostalgia Electrics RHP-310 Power Switch Replacement: passo 6, imagem 1 %32

    • Remove the power switch from the device.

    • You can now replace the power switch if necessary.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 10 outros contribuidores

Dana Clarke

Membro desde: 09/26/12

50 Reputação

Autoria de 6 guias

Emblemas: 8

+5 outros emblemas

Equipe

Cal Poly, Team 16-57, Forte Fall 2012 Membro de Cal Poly, Team 16-57, Forte Fall 2012

CPSU-FORTE-F12S16G57

Membros da 5

Autoria de 6 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 8

Duração total: 1,050