Ir para o conteúdo principal

Conserte seus objetos

Direito de executar reparos

Peças e ferramentas

Introdução

How to disassemble the phone and change broken digitizer glass, LCD display, earpiece, loudspeaker, etc.


Vídeo de Apresentação

  1. Switch off the phone and remove any SIM and memory card. There are two tips T4 screws. There are two tips T4 screws.
    • Switch off the phone and remove any SIM and memory card.

    • There are two tips T4 screws.

  2. Use a plastic tool to separate the back case. Loudspeaker / Ringer
    • Use a plastic tool to separate the back case.

    • Loudspeaker / Ringer

  3. Disconnect the Touchscreen and the LCD display flex cables. The logic board is held by tho locking clips. Use plastic tools to remove it. The logic board is held by tho locking clips. Use plastic tools to remove it.
    • Disconnect the Touchscreen and the LCD display flex cables.

    • The logic board is held by tho locking clips. Use plastic tools to remove it.

  4. Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch

    Kits para o Nintendo Switch

    Um reparo rápido para reiniciar o jogo

    Confira kits para o Nintendo Switch
  5. Light proximity sensor
    • Light proximity sensor

    • Earpiece

    • Audio jack connector

  6. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame. Again use a plastic tool to separate the middle frame and the digitizer frame.
    • Again use a plastic tool to separate the middle frame and the digitizer frame.

  7. This step is for those who wants to change the LCD display. Use a sharp object to pick up a little the display. Then with a spudger or a similar tool separate the display from the frame.
    • This step is for those who wants to change the LCD display.

    • Use a sharp object to pick up a little the display.

    • Then with a spudger or a similar tool separate the display from the frame.

  8. Put some transparent tape on the broken glass. Use hot air to warm and soften the old adhesive tape. Start the separating from the middle, where the contact area is small.
    • Put some transparent tape on the broken glass.

    • Use hot air to warm and soften the old adhesive tape.

    • Start the separating from the middle, where the contact area is small.

  9. Clean the frame Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape. Install the new touch screen and start with reassembling.
    • Clean the frame

    • Clean the frame from the adhesive tape remnants and install a new one if your replacement part has come without adhesive tape.

    • Install the new touch screen and start with reassembling.

  10. That's all.
    • That's all.

    • .

    • .

    • .

    • .

    • .

    • .

    • Did you do it successfully?

Conclusão

To reassemble your device, follow these instructions in reverse order.

11 outras pessoas concluíram este guia.

ZFix

Membro desde: 09/12/2013

172.048 Reputação

307 Guias de autoria

Equipe

Master Techs Membro de Master Techs

Community

294 Membros

936 Guias de autoria

Toughees Telecom the most perfect place for <b>Lumia Screen Repair</b>

You don’t need to worry because we are with you at every step of <a href="http://www.tougheestelecom.in/nokia-lumi... title="Nokia Lumia Repair in Delhi">Lumia screen repair in Delhi</a>, as we understand what one feels when a customer has his <b>Screen Broken or Damaged</b>. You can call us and we will give you the best advice regarding <b>Lumia Screen Repair</b> in Delhi.

Sachin Seth - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 18

Duração total: 6,749