Introdução

This Guide will show how the remove the phone's battery charger connector.

Peças

Não são necessárias peças.

Press the button to remove the back cover.
  • Press the button to remove the back cover.

  • Pull the cover downward and lift it off while still pressing the button.

Adicionar comentário

Lift the battery out of the phone by pushing down from the top and pulling out
  • Lift the battery out of the phone by pushing down from the top and pulling out

Adicionar comentário

  • Grip the front cover from the bottom.

Adicionar comentário

  • Lift the front cover off.

Adicionar comentário

  • Locate 6 screws on front of assembly and unscrew them using a T6 torx screwdriver.

Adicionar comentário

  • Insert spudger along edge of assembly and gently lift assembly away from case

Adicionar comentário

  • Remove assembly from phone

Adicionar comentário

  • The logic board now sits on top of the phone.

Adicionar comentário

  • Lift the logic board out of the phone.

Adicionar comentário

  • Locate battery charger connector

Adicionar comentário

  • Grasp top and bottom of battery charger connector on the left side

Adicionar comentário

  • Lift out the battery charger connector

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Colby Leslie

Member since: 05-10-2010

1 reputação

7 Guides authored

Equipe

Cal Poly, Team 22-3, Maness Fall 2010 Membro de Cal Poly, Team 22-3, Maness Fall 2010

CPSU-MANESS-F10S22G3

4 Membros

9 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Todo: 1,792