Using a plastic pry, get between the plastic frame and the rest of the phone.
  • Using a plastic pry, get between the plastic frame and the rest of the phone.

  • Move it along the frame unlocking the locks that keep the frame in place.

  • Remove the plastic frame.

  • Be careful not to pry to hard and crack the plastic frame.

Adicionar comentário

Using a T-5 screw driver, unscrew the screws on the four corners of the phone.
  • Using a T-5 screw driver, unscrew the screws on the four corners of the phone.

  • Using a pry, get between the screen cover and the rest of the phone.

  • Move alone this layer unlocking the various locks that keep it in place.

  • Carefully remove the screen cover to reveal the logic board.

  • Keep track of the four small screws. They will be needed to put the phone back together.

Adicionar comentário

  • Disconnect the flex cable from the logic board.

  • Disconnect the camera from the logic board.

  • Disconnect the LCD display screen.

  • Disconnect the LCD phone screen.

  • Carefully remove the broken logic board by freeing it from the various locks holding it in place.

  • Be careful not to touch either of the screens. You can leave finger prints and damage the screens.

Adicionar comentário

  • Take the new logic board and connect all the parts you just disconnected to their correct locations.

Adicionar comentário

  • Place the cover so that it is in the correct position to be re-installed.

  • Press gently on the cover so that it snaps back into place.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adrianna

Member since: 18-04-2012

25 reputação

2 Guides authored

Equipe

SUNY Cortland, Team 1-2, Getto Spring 2012 Membro de SUNY Cortland, Team 1-2, Getto Spring 2012

SUNYCORT-GETTO-S12S1G2

2 Membros

8 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 1,381