Introdução

This guide requires that the front plate, keypad, circuit board, back cover, and battery all be removed.

Peças

Não são necessárias peças.

  1. Pull up on both of the clips near the bottom of the phone as shown. Lift off the front plate. Lift off the front plate.
    • Pull up on both of the clips near the bottom of the phone as shown.

    • Lift off the front plate.

  2. The keypad and LCD screen are revealed.
    • The keypad and LCD screen are revealed.

  3. Free shipping on all orders over US$100,00 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Separate the keypad from the phone and place aside. Wipe off any excess dust from where the keypad was attached to the phone.
    • Separate the keypad from the phone and place aside.

    • Wipe off any excess dust from where the keypad was attached to the phone.

  5. Remove the six screws highlighted by the markers using the screwdriver. Remove the six screws highlighted by the markers using the screwdriver.
    • Remove the six screws highlighted by the markers using the screwdriver.

  6. Separate the inside of the phone from the back of the phone. Separate the inside of the phone from the back of the phone.
    • Separate the inside of the phone from the back of the phone.

  7. Locate vibration device on the bottom of the back cover. Pull up on the vibration device using tweezers. Remove the vibration device and place it aside.
    • Locate vibration device on the bottom of the back cover.

    • Pull up on the vibration device using tweezers.

    • Remove the vibration device and place it aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Reid Polstra

Member since: 22-10-2012

1 reputação

7 Guides authored

Equipe

Clemson, Team 15-5, Benson Fall 2012 Membro de Clemson, Team 15-5, Benson Fall 2012

CLEM-BENSON-F12S15G5

3 Membros

7 Guides authored

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 442