Introdução

Use this guide to remove the outer case of the Nintendo Wii U and gain access to the DVD drive.

With the bottom of the console facing up, remove the following 6 screws hidden underneath the white square stickers:
  • With the bottom of the console facing up, remove the following 6 screws hidden underneath the white square stickers:

    • Three 5.1mm Phillips #000 screws

    • Two 6.1mm Tri-wing Y0 screws

    • One 13.2mm Tri-wing Y1 screw

Adicionar comentário

Rotate the console 180 degrees so that the exhaust vents are facing you.
  • Rotate the console 180 degrees so that the exhaust vents are facing you.

  • Remove the two 7.1mm Phillips #00 screws.

Adicionar comentário

Guia de Presente para o Dia dos Pais
Vamos honrar mais do que nossos pais. Vamos celebrar todos os mentores que nos ensinaram a consertar.
Guia de Presente para o Dia dos Pais
Vamos honrar aqueles que nos ensinaram a consertar.
On the side opposite of the exhaust vents, slide the cover faceplate towards the back of the console and pull upwards to release it. On the side opposite of the exhaust vents, slide the cover faceplate towards the back of the console and pull upwards to release it.
  • On the side opposite of the exhaust vents, slide the cover faceplate towards the back of the console and pull upwards to release it.

Adicionar comentário

On the bottom of the console beneath the previously removed faceplate, remove the three 13.2mm Tri-wing Y1 screws.
  • On the bottom of the console beneath the previously removed faceplate, remove the three 13.2mm Tri-wing Y1 screws.

Adicionar comentário

On the back of the console, lift up and release the main top cover. On the back of the console, lift up and release the main top cover. On the back of the console, lift up and release the main top cover.
  • On the back of the console, lift up and release the main top cover.

The front portion of the side of the cover with the vents was kind of stuck on mine. There’s a little rubber piece in there that was the cause of this. But that same rubber piece also makes up the little handle-shaped nub that sticks out of the side there. (There’s also one at the back of the same side, but that one didn’t stick for me.) Lifting also using the little handle made it easy to remove the cover.

Nicholas Halderman - Responder

Conclusão

To reassemble your device, follow these instructions in reverse order.

13 outras pessoas concluíram este guia.

Kim Arre

Member since: 11-01-2013

2.953 reputação

18 Guides authored

Equipe

iFixit Membro de iFixit

Community

114 Membros

5.887 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 7

Últimos 7 dias: 47

Últimos 30 dias: 206

Todo: 14,553