Ir para o conteúdo principal

Nintendo Wii Faceplate Replacement

O que você precisa

  1. Nintendo Wii Faceplate Replacement, Faceplate: passo 1, imagem 1 %32 Nintendo Wii Faceplate Replacement, Faceplate: passo 1, imagem 2 %32
    • Use a metal spudger to remove the white plastic screw covers stuck to the lower case near the front of the Wii.

  2. Nintendo Wii Faceplate Replacement: passo 2, imagem 1 %32
    • Remove the two 8.3 mm Tri-Point screws hidden under the covers you just removed.

  3. Nintendo Wii Faceplate Replacement: passo 3, imagem 1 %32
    • Remove the single 5.9 mm Phillips screw under the controller port door nearest the faceplate.

  4. Nintendo Wii Faceplate Replacement: passo 4, imagem 1 %32
    • Use a metal spudger to remove the rubber foot stuck to the side of the Wii near the DVD drive opening.

  5. Nintendo Wii Faceplate Replacement: passo 5, imagem 1 %32
    • Remove the single 5.9 mm Phillips screw hidden under the foot you just removed.

  6. Nintendo Wii Faceplate Replacement: passo 6, imagem 1 %32 Nintendo Wii Faceplate Replacement: passo 6, imagem 2 %32
    • Carefully pull the faceplate away from the front of the Wii.

    • Use a pair of tweezers to disconnect the LED cable's plastic connector from the motherboard.

    • Remove the faceplate.

Conclusão

To reassemble your device, follow these instructions in reverse order.

22 outras pessoas executaram este guia.

3 comentários

Any more to do if pressing the on button does nothing, its still red power light?

Kyrre - Responder

Tanks for this guide Btw

Kyrre - Responder

Thanks for the guide, I just wish it continued with replacing the components within the faceplate, as I wanted to replace the white shell. Still helpful though!

Cynthia - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 9

Últimos 7 dias: 52

Últimos 30 dias: 333

Duração total: 53,321