Introdução

No one likes a sticky R-button. Clean it out and get back to beating your siblings at Mario Kart.

  1. Remove the two Phillips screws securing the battery cover to the back of the handheld console.
    • Remove the two Phillips screws securing the battery cover to the back of the handheld console.

    • Lift the battery cover off the back of the DSi XL.

    Adicionar comentário

  2. Lift the battery from the DSi XL.
    • Lift the battery from the DSi XL.

    Adicionar comentário

    • Remove the four rubber screw covers on the lower case by prying them up with a push pin.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the following seven Phillips screws that secure the lower case to the rest of the DSi XL:

      • Four silver 5.3 mm screws

      • Two black 5.3 mm screws

      • One black 2.5 mm screw

    Adicionar comentário

    • Turn the DSi XL over, and open the display.

    • Insert a spudger between the upper and lower case at the bottom left corner of the DSi.

    • Slide the spudger along the bottom edge of the upper case to release the latches securing the upper case to the lower case.

    Adicionar comentário

    • Close the display and turn the DSi XL over.

    • Lift the lower case from the front edge.

    • Rotate the lower case away from the DSi.

    • The lower case cannot be completely removed yet, since it is still connected to the motherboard.

    Adicionar comentário

    • Using a spudger, pry the SD card/right shoulder button connector off its socket.

    • Pry the volume button/left shoulder button connector off its socket on the motherboard with a spudger.

    Adicionar comentário

    • Remove the two gold 4.0 mm Phillips screws securing the right shoulder button assembly to the back case.

    • Lift the right shoulder button assembly from the back case.

    • The components of the right shoulder button assembly:

      • Right shoulder button

      • Shoulder button spring

      • Retaining pin

      • Right shoulder button holding panel

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

Member since: 12-04-2010

108.768 reputação

138 Guides authored

Equipe

iFixit Membro de iFixit

Community

113 Membros

7.332 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 3

Todo: 6,476