Introdução
Be the envy of onlooking gamers with a shiny new rear bezel on your DSi XL.
O que você precisa
-
-
-
Use a push pin to remove the four plastic screw covers on the front bezel.
Pergunte ao FixBot
-
-
-
Remove four Phillips screws securing the front bezel to the rear bezel.
-
-
-
-
Insert a spudger into the gap between the front and rear bezel
-
Rotate the spudger away from the DSi XL, prying the two bezels apart.
-
-
-
In the same manner as described above, continue prying along the top edge of the front and rear bezels.
-
-
-
Use the flat end of a spudger to pry the rear camera off the rear bezel.
-
Remove the rear bezel.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
3 outras pessoas executaram este guia.
