Introdução

Be the envy of onlooking gamers with a shiny new rear bezel on your DSi XL.

  1. Use a push pin to remove the four plastic screw covers on the front bezel.
    • Use a push pin to remove the four plastic screw covers on the front bezel.

    Adicionar comentário

  2. Remove four Phillips screws securing the front bezel to the rear bezel.
    • Remove four Phillips screws securing the front bezel to the rear bezel.

    Adicionar comentário

    • Using two hands, gently slide the rear bezel upwards.

    • The rear bezel will move only about 2 mm.

    Adicionar comentário

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Insert a spudger into the gap between the front and rear bezel

    • Rotate the spudger away from the DSi XL, prying the two bezels apart.

    Adicionar comentário

    • In the same manner as described above, continue prying along the top edge of the front and rear bezels.

    Adicionar comentário

    • Separate the rear bezel from the front bezel.

    • Do not attempt to completely remove the rear bezel yet. It is still attached to the front bezel by the rear-facing camera.

    Adicionar comentário

    • Use the flat end of a spudger to pry the rear camera off the rear bezel.

    • Remove the rear bezel.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Matthew Newsom

Member since: 05-01-2010

31.934 reputação

67 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 6

Todo: 4,236